Bent Rim

…and balancing should be done by a professional, using equipment designed for the job * Both tire beads are securely mounted * The wheel is not bent or damaged * There is no buildup of dirt between the hub and the wheel * All of the lugs have been properly torqued * The wheel is securely seated…

…wheel, this gives the tire's sidewall more height, which helps absorb the impacts from the road and will help lessen the chance of flat tires and bent wheels. All wheels we list for an application when shopping for a Winter / Snow Tire & Wheel Package are guaranteed to fit, so there's no…

…going on my seventh year with these wheels, and the silver paint with clearcoat finish still looks like new. I haven't had any issues with bent wheels and to me, the style still looks fresh. The warm weather is here, so enhance your vehicle's look with a Tire & Wheel Package today!

…at vibration location. Rotate tires front to rear on other side of vehicle. Recheck tire and wheel now at vibration location. Any out-of-round or bent wheels must be replaced; if wheels are OK, tire should be broken down, turned 180, lubed, and reseated. Did the vibration start immediately when the…

Ultra Bent Black w/Milled Accent Wheels

…have seen my colleagues (and yes, sometimes myself) running with tires over-inflated or under-inflated. Or driving with too much negative camber, bent wheels, winter tires in the summer, and numerous other sins against proper tire care. While defects do happen, modern tires from reputable brands…

…or location) or an indication the wheel has been bent, it should be removed from service and replaced with a good wheel. Every time new tires are mounted, each wheel should be inspected to verify that it is round and true. If it is found to be bent, it should be removed from service and replaced…

…to clear big tires on the JK, but mine are 4.75" which give very little clearance to the upper control arms. However, these new SPC arms are bent differently and look as though they will gain me some clearance over my current adjustable control arms. The first task was to get the rear end on…

…are available to fit either .453" or .625" rim holes, as well as specialty applications, such as 6mm (.236") or 8mm (.315") holes. Metal clamp-in valves use a metal cap and have effective lengths ranging from flush to 2" and are offered in straight or bent configurations to fit wheels with unique…

…had blown one, if not both passenger side tires. No light was present but I was left with a distinct vibration. Both passenger side wheels had been bent, but the tires survived the impact undamaged. While two of my wheels currently look like taco shells, I was grateful to able to complete the hour…