Camber Kit

Shop By
Camber Kit
Related Categories: Negative Camber Tire | Negative Camber | Inside Tire Wear | Camber Wear | Camber Adjustment Bolts | Camber Bolts | Type R | Strut Assembly | Alignment Specs
  • SPC EZ Cam Bolt Pair

  • …positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper Original Equipment (O.E.) strut/spindle bolt. The easy-to-use adjuster provides built-in adjustment over the life of a vehicleby rotating the head of the bolt. Each kit contains two cam…

  • Related Products: Camber Adjustment Bolts
  • SPC F/M/V/C Forged R Cam Arm

  • …Ford Focus, Mazda3/Mazda5 and Volvo applications.These high-strength Focus/Mazda/Volvo Forged Camber Arms are perfect for tuners or installers that require extended rear camber ranges for these vehicles. Kit includes Original Equipment (O.E.) style bushings installed for a stock ride.Rear Adjustment…

  • SPC Chry/Dodge Rear Camber Kit

  • For select Chrysler/Dodge LX platform applications.The Camber Kit includes a pair of offset bushings to replacethe stock bushings on the vehicle's two rear upper control arms resulting in +/-1.5 degree rear camber adjustment (depending on application).Rear Adjustment Range: -.75 degree to +1.5…

  • SPC Mazda Miata MX-5 Camber/Caster Adjusting Kit

  • …Adjusting Kit is designed to replace stripped or bent Original Equipment cam assemblies on Mazda's Miata MX-5. The kit provides ??A?2.00 degrees of front camber and caster or rear camber and toe adjustment.Adjustment Range: ??A?2.00 degrees of caster, camber and toe change Kits Required:1…

  • Eibach Recommended Align. Kit

  • …Pro-Kit or Sportline spring set, a vehicles' alignment should always be checked. Oncelowered, a wheel's camber may become "increasingly negative," meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road ...

  • Related Products: Negative Camber
  • E46 M3 Track Tires and Wheels

  • …You'll need to get adjustable camber plates for the front so you can run that much negative camber. For the rear, 2.4-2.6 negative camber and the high side of the factory toe-in is normally ideal. You should be able to adjust to these specs without a camber kit. Camber is adjusted at the lower…

  • Related Products: 18x9.5 | E46 M3 | Track Day
  • Dinan Performance Parts are Now Available at Tire Rack

  • …products: * Anti-Roll Bar Sets * Adjustable Coil-Over Suspensions * Performance Spring Sets * Tuned, Progressive Rate Bump Stops * Camber Plates * Rear Suspension Link Kits Over the years, Dinan has earned its reputation throughout the BMW community as the premier North American BMW tuner. They are…

  • Related Products: Bmw Torque
  • Lowering Your Ford Mustang

  • …reduction in camber to counter the camber increase caused by shorter springs. For the newer Mustang, a set of camber bolts will do the trick for the front and an adjustable panhard bar or trailing arm for the rear. When you're looking for Mustang shocks, springs, coil-over kits or other suspension…

  • Road Trip Season

  • …packed with gear for your adventures. For a quick solution to minor punctures, seal and re-inflate your tire with this handy compressor and sealant kit. The compressor runs off of the vehicle's 12 volt power supply and can be used for inflation with or without activating the sealant cartridge.…


Powered by Powered by SLI Systems

THE BEST IN CUSTOMER SUPPORT

Need help choosing the right product for your vehicle? Our team of highly trained experts has the knowledge and passion to help.

Just pick up the phone and give us a ring. Our experts love solving problems and lending a hand (or ear).