Lower Control Arm

Shop By
Lower Control Arm
Related Categories: Tie Rod End | Tie Rod | Koni Installation | 19 Mm Wheel Lock | Method Center Cap | Outer Tie Rod | 15'' 5 On 5.5 | Push Through Center Caps | Push Through Wheel Cap | Method Wheel Caps
  • SPC Chrysler/Dodge Arm

  • …Chrysler/Dodge Arm is an adjustable front control arm that allows for both camber and caster changes. Easy to install and even easier to adjust, this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when vehicles are lowered for performance…

  • Per Unit: 
    Prices from $.00
  • SPC BMW Rear Lower Control Arm

  • For select BMW E36 chassis, E46 chassis and Z4 high performance applications.The rear lower BMW Control Arm from SPC Performance is machined in a silver anodized finished with "SPC red" nuts.Rear Adjustment Range: -1.0 degree to +3.0 degree camberInstallation Time: 1.3 hr. per sideKits Required: 1…

  • Per Unit: 
    Prices from $.00
  • Related Products: Rear Control Arm
  • SPC Chrysler/Dodge Arm

  • …Chrysler/Dodge Arm is an adjustable front control arm that allows for both camber and caster changes. Easy to install and even easier to adjust, this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when vehicles are lowered for performance…

  • Per Unit: 
    Prices from $.00
  • SPC BMW Rear Camber Arm

  • …style arm is an excellent choice when lowering or for correcting rear camber on stock vehicles.Rear Adjustment Range: -1.0 degree to +3.0 degree camberInstallation Time: 1.3 hr. per sideKits Required: 1 kit per wheelFor high performance applications, see SPC Performance's BMW rear lower Control ...

  • Per Unit: 
    Prices from $.00
  • SPC Subaru/Saab EZ Arm XR (PR)

  • …set of two adjustable lower control arms will provide up to +1.5 degree of additional rear camber and toe adjustment for all 1993 and up Imprezas and WRXs (except STIs) and Saab 9-2Xs. Specially designed for theperformance enthusiast, these arms can be used on lowered or stock ride height…

  • Per Unit: 
    Prices from $.00
  • SPC Control Arms For Jeep JK: Part Two

  • …upper control arms, it's recommended to loosen the bolts on the lower arms too, to take out any bind in them that might be caused by installing different length upper arms. The torque specs for the control arms I used are as follows: Lower Control Arm Frame Side: 130 ft lbs Lower Control Arm

  • Related Products: Center Lock Wheels
  • SPC Dodge Dakota Camber/Caster Adjusting Kit

  • The SPC Performance Dodge Dakota Camber/Caster Adjusting Kit is designed to replace Original Equipment cams on the lower control arm of the Dodge Dakota. The remove-and-replace kit provides an A?2.00 degrees of front camber/caster change.Front Adjustment Range: A?2.00 degrees of camber/caster…

  • Per Unit: 
    Prices from $.00
  • SPC Honda Caster Spacers

  • …applications.Honda Caster Spacers from SPC Performance correct front caster. Adding the spacer between the strut rod and large washer adjusts the lower control arm to decrease caster. By removing the spacer, an increase in caster is achieved.Front Adjustment Range: -1/8° to -1/4 °…

  • Per Unit: 
    Prices from $.00
  • SPC Honda Caster Spacers

  • …applications.Honda Caster Spacers from SPC Performance correct front caster. Adding the spacer between the strut rod and large washer adjusts the lower control arm to decrease caster. By removing the spacer, an increase in caster is achieved.Front Adjustment Range: -1/8° to -1/4 °…

  • Per Unit: 
    Prices from $.00
  • SPC Front Camber/Caster Kit

  • For select Ford Thunderbird and Lincoln LS applications.The Camber/Caster Kit installs in the front lower control arm and provides easy, precise adjustment of caster and camber without any further modifications. Adjusts camber +1.0 degree and caster +2.0 degree.Front Adjustment Range: -1.0 degree to…

  • Per Unit: 
    Prices from $.00
  • SPC Taur/Sab SW R Camber Kit

  • …provides camber change up to +2.5 degree on each rear wheel of Ford Taurus and Mercury Sable station wagons only. After replacing the inner lower control arm bolt and elongating the hole, install the cam bolt from this kit and rotate the head to adjust camber.Rear Adjustment Range: -2.5 degree to…

  • Per Unit: 
    Prices from $.00
  • SPC Taur/Sab SW R Camber Kit

  • …provides camber change up to +2.5 degree on each rear wheel of Ford Taurus and Mercury Sable station wagons only. After replacing the inner lower control arm bolt and elongating the hole, install the cam bolt from this kit and rotate the head to adjust camber.Rear Adjustment Range: -2.5 degree to…

  • Per Unit: 
    Prices from $.00
  • SPC GM Rear Cam Nut

  • The SPC Performance GM Rear Cam Nut is designed as a replacement for the non-adjustable nut on the rear lower control arm on General Motor's Theta platform. Providing ±1.00 degree of toe change, the kit adjusts both camber and toe adjusting bolts when used with the vehicle's stock camber…

  • Per Unit: 
    Prices from $.00

Powered by Powered by SLI Systems

THE BEST IN CUSTOMER SUPPORT

Need help choosing the right product for your vehicle? Our team of highly trained experts has the knowledge and passion to help.

Just pick up the phone and give us a ring. Our experts love solving problems and lending a hand (or ear).