Recommended Tire Rotation

Shop By
Want to refine your selection? Search By Vehicle
Recommended Tire Rotation
Related Categories: 5 Tire Rotation Pattern | Bmw Tire Rotation | Tire Depth Chart | Direction Of Rotation | Tire Rotation | Outside Tire Wear | Tire Rotation Noise | Inside Tire Wear | Negative Camber | Canadian Orders
  • Time to rotate your tires!

  • …allow for rotation. Front and rear tires different sizes? Recommended intervals for rotation are about 3,000-5,000 miles. More frequent rotation is important early in the tire's life as a new tire will wear more rapidly than one that has been in service for several years. I recommend staying closer…

  • Frequently Asked Questions

  • …of the vehicle, directional tires are to be used on one side of the vehicle and are intended to be rotated from the front axle to the rear axle. If different tire sizes are used on the front vs. rear axle, the tires become location-specific and prohibit tire rotation unless remounted. 23,567 out…

  • Frequently Asked Questions

  • …of the vehicle, directional tires are to be used on one side of the vehicle and are intended to be rotated from the front axle to the rear axle. If different tire sizes are used on the front vs. rear axle, the tires become location-specific and prohibit tire rotation unless remounted. 23,566 out…

  • Review of: Kumho Ecsta MX

  • …18x8 axis reverbs i.e. psi,rotation,alignment/corner weighting,as they wore,NOISE LEVELS were UNBEARABLY HIGH,they would have the tendency to display scalloped edge wear,while rotation did somewhat counter act this,they just remained way TOO LOUD%21 I would only recommend these for TRACK TIRES ONLY

  • Review of: Kumho Ecsta MX

  • …18x8 axis reverbs i.e. psi,rotation,alignment/corner weighting,as they wore,NOISE LEVELS were UNBEARABLY HIGH,they would have the tendency to display scalloped edge wear,while rotation did somewhat counter act this,they just remained way TOO LOUD%21 I would only recommend these for TRACK TIRES ONLY

  • Review of: Kumho Ecsta MX

  • …18x8 axis reverbs i.e. psi,rotation,alignment/corner weighting,as they wore,NOISE LEVELS were UNBEARABLY HIGH,they would have the tendency to display scalloped edge wear,while rotation did somewhat counter act this,they just remained way TOO LOUD%21 I would only recommend these for TRACK TIRES ONLY


Powered by Powered by SLI Systems

THE BEST IN CUSTOMER SUPPORT

Need help choosing the right product for your vehicle? Our team of highly trained experts has the knowledge and passion to help.

Just pick up the phone and give us a ring. Our experts love solving problems and lending a hand (or ear).