Retaining Clip

…flat against the vehicle's hubs. Remove any rust and dirt from the mounting surface of brake rotors and drums. Remove any temporary retaining devices, like stud clips. These are used to hold brake rotors and drums in place before the wheels were installed at the factory (Photo C). These will keep…

…flat against the vehicle's hubs. Remove any rust and dirt from the mounting surface of brake rotors and drums. Remove any temporary retaining devices, like stud clips. These are used to hold brake rotors and drums in place before the wheels were installed at the factory (Photo C). These will keep…

…flat against the vehicle's hubs. Remove any rust and dirt from the mounting surface of brake rotors and drums. Remove any temporary retaining devices, like stud clips. These are used to hold brake rotors and drums in place before the wheels were installed at the factory (Photo C). These will keep…

…flat against the vehicle's hubs. Remove any rust and dirt from the mounting surface of brake rotors and drums. Remove any temporary retaining devices, like stud clips. These are used to hold brake rotors and drums in place before the wheels were installed at the factory (Photo C). These will keep…

…following items per side: * Inner rear toe link. Mark location for inner bolt (22) with nut (19). * Outer rear toe link tie rod end (17) with retainer clip instead of a cotter pin. * Shock mounting bolt in lower control arm (17). * Trunk floor piece and six plastic fasteners to remove side panel for…