Tire Rotation Patterns

…three annual rotations. All they have to do is rotate their summer tires once more in July to complete their annual preventative maintenance. Four (4) Tire Rotation What tire rotation pattern should be followed? The Tire & Rim Association has identified three traditional rotation patterns covering…

…Highway Tires Tire Specs Explained: Section Width Tire Specs Explained: Tread Depth Tire Specs Explained: Tread Width Measuring Tire Specs: Globalized Standards Tire Tread Markings Tire Tread Patterns Tire Warranties Trailer Tires Tramlining: Coping with the Ruts in the Road Tread Pattern Noise…

…same pattern. Tires featuring symmetric tread patterns allow using multiple tire rotation patterns. Asymmetric Tread Patterns An asymmetric pattern is designed to blend the requirements of dry grip and water dispersal/snow traction where the tread pattern changes across the face of the tire. An…

…it's probable the first tire rotation will be required as a stand-alone service. NOTE: Skipping tire rotations is likely to promote irreversible irregular tread wear patterns that will increase noise over time. Related Links * Noise Reducing Tire Technology * Tire Rotation Instructions SERVICE WITH…

…Full-Size Matching Spare Tires and Wheels While full-size matching spare tires and wheels require the greatest amount of storage space, they are the most versatile. Full-size matching spare tires and wheels should be integrated into the vehicle's tire rotation pattern from the beginning. This will…

…spare tire should use the vehicle's five-tire pattern at every tire rotation. Not only will this prevent the spare tire from sitting idle, it will keep all five tires' tread depths roughly equivalent throughout their life and extend the tire replacement intervals (if rotating four tires would result…

…vehicle's tire rotation pattern, it will not match the tread depth of the four worn tires on the ground when called into service. Additionally, if a single tire is replaced by the full size spare tire, hopefully the new replacement tire can remain as the spare tire until the other four tires have…

…tire and wheel combination as its spare, they should be included in the vehicle's tire rotations beginning with the first one. This will allow the owner to secure the spare tire's value and will prevent it from eventually aging out before ever being used. Adding a fifth tire to the rotation pattern…

…circumference of the tire) may reveal developing wear patterns sooner than visual inspections. The tires can be saved if noticed early enough. However if not discovered in time, both rear tires should be replaced. Periodic tire rotation is also important. The recommended rotation pattern for front…

…the rotation patterns provided in the vehicle's owner's manual or as established by the industry to help enhance wear quality and equalize front-to-rear and side-to-side wear rates. The minor differences in tread depth between tires that might be encountered immediately after periodic tire rotations…

…a Friend Mixing Tires As a general rule, tires should not be mixed on any vehicle unless specified as acceptable by the tire or vehicle manufacturer. Drivers should avoid mixing tires with different tread patterns, internal constructions or sizes, and use identical tires on all of their vehicle's…

…across part or all of the tread area. Proper tire rotation will prevent it from getting deeper, but if left in the same wheel position it will likely grow further, eventually tearing open to the point the tire must be replaced. Usually, after rotating away from the wheel position where the splice…

…a tire's tread pattern, it can lift the tread until it loses contact with the road. Tires with less tread depth will hydroplane in shallower water and at lower speeds than tires with deeper treads. Whether the front or rear tires hydroplane first can make all the difference. Hydroplaning front tires…

…Highway Tires Tire Specs Explained: Section Width Tire Specs Explained: Tread Depth Tire Specs Explained: Tread Width Measuring Tire Specs: Globalized Standards Tire Tread Markings Tire Tread Patterns Tire Warranties Trailer Tires Tramlining: Coping with the Ruts in the Road Tread Pattern Noise…

…rotated and aligned, replacing worn suspension components as necessary. Since according to most states' laws, tires become legally worn out when they reach 2/32" of remaining tread depth (identified when the tread blocks/ribs wear down to the bars molded across their tread pattern), all tire…